View Source calendar (stdlib v6.1.2)

Local and universal time, day of the week, date and time conversions.

This module provides computation of local and universal time, day of the week, and many time conversion functions.

Time is local when it is adjusted in accordance with the current time zone and daylight saving. Time is universal when it reflects the time at longitude zero, without any adjustment for daylight saving. Universal Coordinated Time (UTC) time is also called Greenwich Mean Time (GMT).

The time functions local_time/0 and universal_time/0 in this module both return date and time. This is because separate functions for date and time can result in a date/time combination that is displaced by 24 hours. This occurs if one of the functions is called before midnight, and the other after midnight. This problem also applies to the Erlang BIFs date/0 and time/0, and their use is strongly discouraged if a reliable date/time stamp is required.

All dates conform to the Gregorian calendar. This calendar was introduced by Pope Gregory XIII in 1582 and was used in all Catholic countries from this year. Protestant parts of Germany and the Netherlands adopted it in 1698, England followed in 1752, and Russia in 1918 (the October revolution of 1917 took place in November according to the Gregorian calendar).

The Gregorian calendar in this module is extended back to year 0. For a given date, the gregorian days is the number of days up to and including the date specified. Similarly, the gregorian seconds for a specified date and time is the number of seconds up to and including the specified date and time.

For computing differences between epochs in time, use the functions counting gregorian days or seconds. If epochs are specified as local time, they must be converted to universal time to get the correct value of the elapsed time between epochs. Use of function time_difference/2 is discouraged.

Different definitions exist for the week of the year. This module contains a week of the year implementation conforming to the ISO 8601 standard. As the week number for a specified date can fall on the previous, the current, or on the next year, it is important to specify both the year and the week number. Functions iso_week_number/0 and iso_week_number/1 return a tuple of the year and the week number.

Leap Years

The notion that every fourth year is a leap year is not completely true. By the Gregorian rule, a year Y is a leap year if one of the following rules is valid:

  • Y is divisible by 4, but not by 100.
  • Y is divisible by 400.

Hence, 1996 is a leap year, 1900 is not, but 2000 is.

Date and Time Source

Local time is obtained from the Erlang BIF localtime/0. Universal time is computed from the BIF universaltime/0.

The following apply:

  • There are 86400 seconds in a day.
  • There are 365 days in an ordinary year.
  • There are 366 days in a leap year.
  • There are 1461 days in a 4 year period.
  • There are 36524 days in a 100 year period.
  • There are 146097 days in a 400 year period.
  • There are 719528 days between Jan 1, 0 and Jan 1, 1970.

Summary

Types

A date using the Gregorian calendar.

The last day of the month.

The time unit used by the rfc3339 conversion functions.

The year using the Gregorian calendar.

Functions

Computes the number of gregorian days starting with year 0 and ending at the specified date.

Computes the number of gregorian seconds starting with year 0 and ending at the specified date and time.

Computes the day of the week from the specified Year, Month, and Day. Returns the day of the week as 1: Monday, 2: Tuesday, and so on.

Computes the date from the specified number of gregorian days.

Computes the date and time from the specified number of gregorian seconds.

Checks if the specified year is a leap year.

Returns tuple {Year, WeekNum} representing the ISO week number for the actual date. To determine the actual date, use function local_time/0.

Returns tuple {Year, WeekNum} representing the ISO week number for the specified date.

Computes the number of days in a month.

Returns the local time reported by the underlying operating system.

Converts from local time to Universal Coordinated Time (UTC). DateTime1 must refer to a local date after Jan 1, 1970.

Converts from local time to Universal Coordinated Time (UTC). DateTime1 must refer to a local date after Jan 1, 1970.

Returns Universal Coordinated Time (UTC) converted from the return value from erlang:timestamp/0.

Returns local date and time converted from the return value from erlang:timestamp/0.

Returns Universal Coordinated Time (UTC) converted from the return value from erlang:timestamp/0.

Converts an RFC 3339 timestamp into system time. The data format of RFC 3339 timestamps is described by RFC 3339. Starting from OTP 25.1, the minutes part of the time zone is optional.

Converts a specified number of seconds into days, hours, minutes, and seconds. Time is always non-negative, but Days is negative if argument Seconds is.

Computes the time from the specified number of seconds. Seconds must be less than the number of seconds per day (86400).

Converts a specified system time into local date and time.

Converts a system time into an RFC 3339 timestamp.

Converts a specified system time into universal date and time.

Returns the difference between two {Date, Time} tuples. T2 is to refer to an epoch later than T1.

Returns the number of seconds since midnight up to the specified time.

Returns the Universal Coordinated Time (UTC) reported by the underlying operating system. Returns local time if universal time is unavailable.

Converts from Universal Coordinated Time (UTC) to local time. DateTime must refer to a date after Jan 1, 1970.

This function checks if a date is a valid.

Types

-type date() :: {year(), month(), day()}.

A date using the Gregorian calendar.

All APIs expect this to be a valid date. If the source of the date is unknown, then verify that is it valid by calling valid_date/1 before using it.

-type datetime1970() :: {{year1970(), month(), day()}, time()}.
-type datetime() :: {date(), time()}.
-type day() :: 1..31.
Link to this type

daynum()

View Source (not exported)
-type daynum() :: 1..7.
-type hour() :: 0..23.
-type ldom() :: 28 | 29 | 30 | 31.

The last day of the month.

Link to this type

minute()

View Source (not exported)
-type minute() :: 0..59.
Link to this type

month()

View Source (not exported)
-type month() :: 1..12.
Link to this type

offset()

View Source (not exported)
-type offset() :: [byte()] | (Time :: integer()).
Link to this type

rfc3339_string()

View Source (not exported)
-type rfc3339_string() :: [byte(), ...].
Link to this type

rfc3339_time_unit()

View Source (not exported)
-type rfc3339_time_unit() :: microsecond | millisecond | nanosecond | second | native.

The time unit used by the rfc3339 conversion functions.

Note

The native time unit was added to rfc3339_time_unit/0 in OTP 25.0.

Link to this type

second()

View Source (not exported)
-type second() :: 0..59.
Link to this type

secs_per_day()

View Source (not exported)
-type secs_per_day() :: 0..86399.
-type time() :: {hour(), minute(), second()}.
Link to this type

weeknum()

View Source (not exported)
-type weeknum() :: 1..53.
Link to this type

year1970()

View Source (not exported)
-type year1970() :: 1970..10000.
-type year() :: non_neg_integer().

The year using the Gregorian calendar.

Year cannot be abbreviated. For example, 93 denotes year 93, not 1993. The valid range depends on the underlying operating system.

Link to this type

yearweeknum()

View Source (not exported)
-type yearweeknum() :: {year(), weeknum()}.

Functions

Link to this function

date_to_gregorian_days(Date)

View Source
-spec date_to_gregorian_days(Date) -> Days when Date :: date(), Days :: non_neg_integer().

Computes the number of gregorian days starting with year 0 and ending at the specified date.

Link to this function

date_to_gregorian_days(Year, Month, Day)

View Source
-spec date_to_gregorian_days(Year, Month, Day) -> Days
                                when
                                    Year :: year(),
                                    Month :: month(),
                                    Day :: day(),
                                    Days :: non_neg_integer().

Equivalent to date_to_gregorian_days({Year, Month, Day}).

Link to this function

datetime_to_gregorian_seconds(DateTime)

View Source
-spec datetime_to_gregorian_seconds(DateTime) -> Seconds
                                       when DateTime :: datetime(), Seconds :: non_neg_integer().

Computes the number of gregorian seconds starting with year 0 and ending at the specified date and time.

-spec day_of_the_week(Date) -> daynum() when Date :: date().

Computes the day of the week from the specified Year, Month, and Day. Returns the day of the week as 1: Monday, 2: Tuesday, and so on.

Link to this function

day_of_the_week(Year, Month, Day)

View Source
-spec day_of_the_week(Year, Month, Day) -> daynum() when Year :: year(), Month :: month(), Day :: day().

Equivalent to day_of_the_week({Year, Month, Day}).

Link to this function

gregorian_days_to_date(Days)

View Source
-spec gregorian_days_to_date(Days) -> date() when Days :: non_neg_integer().

Computes the date from the specified number of gregorian days.

Link to this function

gregorian_seconds_to_datetime(Seconds)

View Source
-spec gregorian_seconds_to_datetime(Seconds) -> datetime() when Seconds :: non_neg_integer().

Computes the date and time from the specified number of gregorian seconds.

-spec is_leap_year(Year) -> boolean() when Year :: year().

Checks if the specified year is a leap year.

Link to this function

iso_week_number()

View Source (since OTP R14B02)
-spec iso_week_number() -> yearweeknum().

Returns tuple {Year, WeekNum} representing the ISO week number for the actual date. To determine the actual date, use function local_time/0.

Link to this function

iso_week_number(Date)

View Source (since OTP R14B02)
-spec iso_week_number(Date) -> yearweeknum() when Date :: date().

Returns tuple {Year, WeekNum} representing the ISO week number for the specified date.

Link to this function

last_day_of_the_month(Year, Month)

View Source
-spec last_day_of_the_month(Year, Month) -> LastDay
                               when Year :: year(), Month :: month(), LastDay :: ldom().

Computes the number of days in a month.

-spec local_time() -> datetime().

Returns the local time reported by the underlying operating system.

Link to this function

local_time_to_universal_time(DateTime1)

View Source
This function is deprecated. calendar:local_time_to_universal_time/1 is deprecated; use calendar:local_time_to_universal_time_dst/1 instead.
-spec local_time_to_universal_time(DateTime1) -> DateTime2
                                      when DateTime1 :: datetime1970(), DateTime2 :: datetime1970().

Converts from local time to Universal Coordinated Time (UTC). DateTime1 must refer to a local date after Jan 1, 1970.

Warning

This function is deprecated. Use local_time_to_universal_time_dst/1 instead, as it gives a more correct and complete result. Especially for the period that does not exist, as it is skipped during the switch to daylight saving time, this function still returns a result.

Link to this function

local_time_to_universal_time_dst(DateTime1)

View Source
-spec local_time_to_universal_time_dst(DateTime1) -> [DateTime]
                                          when DateTime1 :: datetime1970(), DateTime :: datetime1970().

Converts from local time to Universal Coordinated Time (UTC). DateTime1 must refer to a local date after Jan 1, 1970.

The return value is a list of 0, 1, or 2 possible UTC times:

  • [] - For a local {Date1, Time1} during the period that is skipped when switching to daylight saving time, there is no corresponding UTC, as the local time is illegal (it has never occured).

  • [DstDateTimeUTC, DateTimeUTC] - For a local {Date1, Time1} during the period that is repeated when switching from daylight saving time, two corresponding UTCs exist; one for the first instance of the period when daylight saving time is still active, and one for the second instance.

  • [DateTimeUTC] - For all other local times only one corresponding UTC exists.

-spec now_to_datetime(Now) -> datetime1970() when Now :: erlang:timestamp().

Returns Universal Coordinated Time (UTC) converted from the return value from erlang:timestamp/0.

-spec now_to_local_time(Now) -> datetime1970() when Now :: erlang:timestamp().

Returns local date and time converted from the return value from erlang:timestamp/0.

Link to this function

now_to_universal_time(Now)

View Source
-spec now_to_universal_time(Now) -> datetime1970() when Now :: erlang:timestamp().

Returns Universal Coordinated Time (UTC) converted from the return value from erlang:timestamp/0.

Link to this function

rfc3339_to_system_time(DateTimeString)

View Source (since OTP 21.0)
-spec rfc3339_to_system_time(DateTimeString) -> integer() when DateTimeString :: rfc3339_string().

Equivalent to rfc3339_to_system_time(DateTimeString, []).

Link to this function

rfc3339_to_system_time(DateTimeString, Options)

View Source (since OTP 21.0)
-spec rfc3339_to_system_time(DateTimeString, Options) -> integer()
                                when
                                    DateTimeString :: rfc3339_string(),
                                    Options :: [Option],
                                    Option :: {unit, rfc3339_time_unit()}.

Converts an RFC 3339 timestamp into system time. The data format of RFC 3339 timestamps is described by RFC 3339. Starting from OTP 25.1, the minutes part of the time zone is optional.

Valid option:

  • {unit, Unit} - The time unit of the return value. The default is second.
1> calendar:rfc3339_to_system_time("2018-02-01T16:17:58+01:00").
1517498278
2> calendar:rfc3339_to_system_time("2018-02-01 15:18:02.088Z",
   [{unit, nanosecond}]).
1517498282088000000
Link to this function

seconds_to_daystime(Seconds)

View Source
-spec seconds_to_daystime(Seconds) -> {Days, Time}
                             when Seconds :: integer(), Days :: integer(), Time :: time().

Converts a specified number of seconds into days, hours, minutes, and seconds. Time is always non-negative, but Days is negative if argument Seconds is.

Link to this function

seconds_to_time(Seconds)

View Source
-spec seconds_to_time(Seconds) -> time() when Seconds :: secs_per_day().

Computes the time from the specified number of seconds. Seconds must be less than the number of seconds per day (86400).

Link to this function

system_time_to_local_time(Time, TimeUnit)

View Source (since OTP 21.0)
-spec system_time_to_local_time(Time, TimeUnit) -> datetime()
                                   when Time :: integer(), TimeUnit :: erlang:time_unit().

Converts a specified system time into local date and time.

Link to this function

system_time_to_rfc3339(Time)

View Source (since OTP 21.0)
-spec system_time_to_rfc3339(Time) -> DateTimeString
                                when Time :: integer(), DateTimeString :: rfc3339_string().

Equivalent to system_time_to_rfc3339(Time, []).

Link to this function

system_time_to_rfc3339(Time, Options)

View Source (since OTP 21.0)
-spec system_time_to_rfc3339(Time, Options) -> DateTimeString
                                when
                                    Time :: integer(),
                                    Options :: [Option],
                                    Option ::
                                        {offset, offset()} |
                                        {time_designator, byte()} |
                                        {unit, rfc3339_time_unit()},
                                    DateTimeString :: rfc3339_string().

Converts a system time into an RFC 3339 timestamp.

The data format of RFC 3339 timestamps is described by RFC 3339. The data format of offsets is also described by RFC 3339.

Valid options:

  • {offset, Offset} - The offset, either a string or an integer, to be included in the formatted string. An empty string, which is the default, is interpreted as local time. A non-empty string is included as is. The time unit of the integer is the same as the one of Time.

  • {time_designator, Character} - The character used as time designator, that is, the date and time separator. The default is $T.

  • {unit, Unit} - The time unit of Time. The default is second. If some other unit is given (millisecond, microsecond, nanosecond, or native), the formatted string includes a fraction of a second. The number of fractional second digits is three, six, or nine depending on what time unit is chosen. For native three fractional digits are included. Notice that trailing zeros are not removed from the fraction.

1> calendar:system_time_to_rfc3339(erlang:system_time(second)).
"2018-04-23T14:56:28+02:00"
2> calendar:system_time_to_rfc3339(erlang:system_time(second),
   [{offset, "-02:00"}]).
"2018-04-23T10:56:52-02:00"
3> calendar:system_time_to_rfc3339(erlang:system_time(second),
   [{offset, -7200}]).
"2018-04-23T10:57:05-02:00"
4> calendar:system_time_to_rfc3339(erlang:system_time(millisecond),
   [{unit, millisecond}, {time_designator, $\s}, {offset, "Z"}]).
"2018-04-23 12:57:20.482Z"
Link to this function

system_time_to_universal_time(Time, TimeUnit)

View Source (since OTP 21.0)
-spec system_time_to_universal_time(Time, TimeUnit) -> datetime()
                                       when Time :: integer(), TimeUnit :: erlang:time_unit().

Converts a specified system time into universal date and time.

-spec time_difference(T1, T2) -> {Days, Time}
                         when T1 :: datetime(), T2 :: datetime(), Days :: integer(), Time :: time().

Returns the difference between two {Date, Time} tuples. T2 is to refer to an epoch later than T1.

Warning

This function is obsolete. Use the conversion functions for gregorian days and seconds instead.

-spec time_to_seconds(Time) -> secs_per_day() when Time :: time().

Returns the number of seconds since midnight up to the specified time.

-spec universal_time() -> datetime().

Returns the Universal Coordinated Time (UTC) reported by the underlying operating system. Returns local time if universal time is unavailable.

Link to this function

universal_time_to_local_time(DateTime)

View Source
-spec universal_time_to_local_time(DateTime) -> datetime() when DateTime :: datetime1970().

Converts from Universal Coordinated Time (UTC) to local time. DateTime must refer to a date after Jan 1, 1970.

-spec valid_date(Date) -> boolean() when Date :: date().

This function checks if a date is a valid.

Link to this function

valid_date(Year, Month, Day)

View Source
-spec valid_date(Year, Month, Day) -> boolean()
                    when Year :: integer(), Month :: integer(), Day :: integer().

Equivalent to valid_date({Year, Month, Day}).