<!--
%CopyrightBegin%

SPDX-License-Identifier: Apache-2.0

Copyright Ericsson AB 2023-2025. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

%CopyrightEnd%
-->
# Modules

## Module Syntax

Erlang code is divided into _modules_. A module consists of a sequence of
attributes and function declarations, each terminated by a period (`.`).

_Example:_

```erlang
-module(m).          % module attribute
-export([fact/1]).   % module attribute

fact(N) when N>0 ->  % beginning of function declaration
    N * fact(N-1);   %  |
fact(0) ->           %  |
    1.               % end of function declaration
```

For a description of function declarations, see
[Function Declaration Syntax](ref_man_functions.md).

## Module Attributes

A _module attribute_ defines a certain property of a module.

A module attribute consists of a tag and a value:

```text
-Tag(Value).
```

`Tag` must be an atom, while `Value` must be a literal term. As a convenience in
user-defined attributes, if the literal term `Value` has the syntax `Name/Arity`
(where `Name` is an atom and `Arity` a positive integer), the term `Name/Arity`
is translated to `{Name,Arity}`.

Any module attribute can be specified. The attributes are stored in the compiled
code and can be retrieved by calling `Module:module_info(attributes)`, or by
using the module [beam_lib](`beam_lib:chunks/2`) in STDLIB.

Several module attributes have predefined meanings. Some of them have arity two,
but user-defined module attributes must have arity one.

### Pre-Defined Module Attributes

Pre-defined module attributes are to be placed before any function declaration.

- **`-module(Module).`** - Module declaration, defining the name of the module.
  The name `Module`, an atom, is to be the same as the file name minus the extension
  `.erl`. Otherwise [code loading](code_loading.md#loading) does not work as
  intended.

  This attribute is to be specified first and is the only mandatory attribute.

- **`-export(Functions).`** - Exported functions. Specifies which of the
  functions, defined within the module, are visible from outside the
  module.

  `Functions` is a list `[Name1/Arity1, ..., NameN/ArityN]`, where each `NameI`
  is an atom and `ArityI` an integer.

- **`-import(Module, Functions).`** - Imported functions. Can be called the same
  way as local functions, that is, without any module prefix.

  `Module`, an atom, specifies which module to import functions from.
  `Functions` is a list similar to that for `export`.

- **`-moduledoc(Documentation).` or `-moduledoc Documentation.`** - The user
  documentation for this module. The allowed values for `Documentation` are the
  same as for [`-doc`](modules.md#documentation-attributes).

  See the [Documentation](documentation.md) for more details about how
  to use `-moduledoc`.

- **`-compile(Options).`** - Compiler options. `Options` is a single option or a
  list of options. This attribute is added to the option list when compiling the
  module. See module `m:compile` in Compiler.

- **`-vsn(Vsn).`** - Module version. `Vsn` is any literal term and can be
  retrieved using `beam_lib:version/1`.

  If this attribute is not specified, the version defaults to the MD5 checksum
  of the module.

- **`-on_load(Function).`** - This attribute names a function that is to be run
  automatically when a module is loaded. For more information, see
  [Running a Function When a Module is Loaded](code_loading.md#on_load).

- **`-nifs(Functions).`{: #nifs_attribute }** - Specifies which of the
  functions, defined within the module, may be loaded as NIFs with
  `erlang:load_nif/2`.

  `Functions` is a list `[Name1/Arity1, ..., NameN/ArityN]`, where each `NameI`
  is an atom and `ArityI` an integer.

  While not strictly necessary, it is recommended to use the `-nifs()` attribute in
  any module that loads NIFs, to allow the compiler to make better decisions
  regarding optimizations.

  There is no need to add `-nifs([])` in modules that do not load NIFs. The lack
  of any call to `erlang:load_nif/2`, from within the module, is enough for the
  compiler to draw the same conclusion.

  > #### Change {: .info }
  >
  > The special meaning for the `-nifs()` attribute was introduced in Erlang/OTP
  > 25.0. In previous releases, `-nifs()` was accepted, but had no special
  > meaning.

### Behaviour Module Attribute

It is possible to specify that the module is the callback module for a
_behaviour_:

```erlang
-behaviour(Behaviour).
```

The atom `Behaviour` gives the name of the behaviour, which can be a
user-defined behaviour or one of the following OTP standard behaviours:

- `gen_server`
- `gen_statem`
- `gen_event`
- `supervisor`

The spelling `behavior` is also accepted.

The callback functions of the module can be specified either directly by the
exported function `behaviour_info/1`:

```erlang
behaviour_info(callbacks) -> Callbacks.
```

or by a `-callback` attribute for each callback function:

```erlang
-callback Name(Arguments) -> Result.
```

Here, `Arguments` is a list of zero or more arguments. The `-callback` attribute
is to be preferred since the extra type information can be used by tools to
produce documentation or find discrepancies.

Read more about behaviours and callback modules in
[OTP Design Principles](`e:system:design_principles.md#behaviours`).

### Record Definitions

The same syntax as for module attributes is used for record definitions:

```erlang
-record(Record, Fields).
```

Record definitions are allowed anywhere in a module, also among the function
declarations. Read more in [Records](ref_man_records.md).

### Preprocessor

The same syntax as for module attributes is used by the preprocessor, which
supports file inclusion, macros, and conditional compilation:

```erlang
-include("SomeFile.hrl").
-define(Macro, Replacement).
```

Read more in [Preprocessor](macros.md).

### Setting File and Line

The same syntax as for module attributes is used for changing the pre-defined
macros `?FILE` and `?LINE`:

```erlang
-file(File, Line).
```

This attribute is used by tools, such as Yecc, to inform the compiler that the
source program is generated by another tool. It also indicates the
correspondence of source files to lines of the original user-written file, from
which the source program is produced.

### Types and function specifications

A syntax similar to that for module attributes is used for specifying types and
function specifications:

```erlang
-type my_type() :: atom() | integer().
-spec my_function(integer()) -> integer().
```

Read more in [Types and Function specifications](typespec.md).

The description is based on
[EEP8 - Types and function specifications](http://www.erlang.org/eeps/eep-0008.html),
which is not to be further updated.

### Documentation attributes

The module attribute `-doc(Documentation)` is used to provide user documentation
for a function/type/callback:

```erlang
-doc("Example documentation").
example() -> ok.
```

The attribute should be placed just before the entity it documents. The
parentheses are optional around `Documentation`. The allowed values for
`Documentation` are:

- **[literal string](data_types.md#string) or
  [utf-8 encoded binary string](expressions.md#unicode-segments)** - The string
  documenting the entity. Any literal string is allowed, so both
  [triple quoted strings](data_types.md#tqstring) and
  [sigils](data_types.md#sigil) that translate to literal strings can be used.
  The following examples are equivalent:

  ```erlang
  -doc("Example \"docs\"").
  -doc(<<"Example \"docs\""/utf8>>).
  -doc ~S/Example "docs"/.
  -doc """
     Example "docs"
     """
  -doc ~B|Example "docs"|.
  ```

  For clarity it is recommended to use either normal `"strings"` or triple
  quoted strings for documentation attributes.

- **`{file, ` `t:file:name/0` `}`** - Read the contents of filename and use
  that as the documentation string.

- **`false`** - Set the current entity as hidden, that is, it should not be
  listed as an available function and has no documentation.

- **`Metadata :: `[`map()`](`t:erlang:map/0`)** - Metadata about the current
  entity. Some of the keys in the metadata have a special meaning. See
  [Moduledoc metadata](`e:system:documentation.md#moduledoc-metadata`) and
  [Doc metadata](`e:system:documentation.md#doc-metadata`) for more details.

It is possible to have multiple Metadata doc attributes per entity, but only a
single documentation string entry is allowed.

See the [Documentation](documentation.md) guide in the Erlang Reference Manual
for more details.

## The feature directive

While not a module attribute, but rather a directive (since it might affect
syntax), there is the `-feature(..)` directive used for enabling and disabling
[features](`e:system:features.md#features`).

The syntax is similar to that of an attribute, but has two arguments:

```erlang
-feature(FeatureName, enable | disable).
```

Note that the [feature directive](macros.md#feature-directive) can only appear
in a prefix of the module.

## Comments

Comments can be placed anywhere in a module except within strings and
quoted atoms. A comment begins with the character `%`, and continues
up to but not including the next end of line. A comment has no effect,
being essentially equivalent to white space.

## module_info/0 and module_info/1 functions

The compiler automatically inserts the two special, exported functions into each
module:

- `Module:module_info/0`
- `Module:module_info/1`

When called, these functions retrieve information about the module.

### module_info/0

The `module_info/0` function in each module returns a list of
`{Key,Value}` tuples with information about the module. At the time of this
writing, the list contains tuples having the following `Key`s:
`module`, `attributes`, `compile`, `exports`, and `md5`.  The order
and number of tuples may change without prior notice.

### module_info/1

The call `module_info(Key)`, where `Key` is an atom, returns a single piece of
information about the module.

The following values are allowed for `Key`:

- **`module`** - Returns an atom representing the module name.

- **`attributes`** - Returns a list of `{AttributeName,ValueList}` tuples, where
  `AttributeName` is the name of an attribute, and `ValueList` is a list of
  values. Notice that a given attribute can occur more than once in the list
  with different values if the attribute occurs more than once in the module.

  The list of attributes becomes empty if the module is stripped with
  `beam_lib:strip/1`.

- **`compile`** - Returns a list of tuples with information about how the module
  was compiled. This list is empty if the module has been stripped with
  `beam_lib:strip/1`.

- **`md5`** - Returns a binary representing the MD5 checksum of the module.

- **`exports`** - Returns a list of `{Name,Arity}` tuples with all exported
  functions in the module.

- **`functions`** - Returns a list of `{Name,Arity}` tuples with all functions
  in the module.

- **`nifs`** - Returns a list of `{Name,Arity}` tuples with all NIF functions in
  the module.