Erlang logo
User's Guide
Reference Manual
Release Notes
PDF
Top

Simple Network Management Protocol (SNMP)
User's Guide
Version 4.25.1


Expand All
Contract All

Chapters

13 Definition of Manager Net if

IMAGE MISSING
Figure 13.1:   The Purpose of Manager Net if

The Network Interface (Net if) process delivers SNMP PDUs to the manager server, and receives SNMP PDUs from the manager server. The most common behaviour of a Net if process is that is receives request PDU from the manager server, encodes the PDU into bytes and transmits the bytes onto the network to an agent. When the reply from the agent is received by the Net if process, which it decodes into an SNMP PDU, which it sends to the manager server.

However, that simple behaviour can be modified in numerous ways. For example, the Net if process can apply some kind of encrypting/decrypting scheme on the bytes.

The snmp application provides two different modules, snmpm_net_if (the default) and snmpm_net_if_mt, both uses the UDP as the transport protocol. The difference between the two modules is that the latter is "multi-threaded", i.e. for each message/request a new process is created that process the message/request and then exits.

It is also possible to write your own Net if process, this section describes how to write a Net if processdo that.

13.1  Mandatory Functions

A Net if process must implement the SNMP manager network interface behaviour.

13.2  Messages

The section Messages describes mandatory messages, which Net if must send to the manager server process.

Net if must send the following message when it receives an SNMP PDU from the network that is aimed for the MasterAgent:

Server ! {snmp_pdu, Pdu, Addr, Port}
    
  • Pdu is an SNMP PDU record, as defined in snmp_types.hrl, with the SNMP request.

  • Addr is the source address.

  • Port is port number of the sender.

Server ! {snmp_trap, Trap, Addr, Port}
    
  • Trap is either an SNMP pdu record or an trappdu record, as defined in snmp_types.hrl, with the SNMP request.

  • Addr is the source address.

  • Port is port number of the sender.

Server ! {snmp_inform, Ref, Pdu, PduMS, Addr, Port}
    
  • Ref is either the atom ignore or something that can be used to identify the inform-request (e.g. request-id). ignore is used if the response (acknowledgment) to the inform-request has already been sent (this means that the server will not make the call to the inform_response function). See the inform request behaviour configuration option for more info.

  • Pdu is an SNMP PDU record, as defined in snmp_types.hrl, with the SNMP request.

  • Addr is the source address.

  • Port is port number of the sender.

Server ! {snmp_report, Data, Addr, Port}
    
  • Data is either {ok, Pdu} or {error, ReqId, ReasonInfo, Pdu}. Which one is used depends on the return value from the MPD process_msg function. If the MsgData is ok, the first is used, and if it is {error, ReqId, Reason} the latter is used.

  • Pdu is an SNMP PDU record, as defined in snmp_types.hrl, with the SNMP request.

  • ReqId is an integer.

  • ReasonInfo is a term().

  • Addr is the source address.

  • Port is port number of the sender.

Notes

Since the Net if process is responsible for encoding and decoding of SNMP messages, it must also update the relevant counters in the SNMP group in MIB-II. It can use the functions in the module snmpm_mpd for this purpose (refer to the Reference Manual, section snmp, module snmpm_mpd for more details).

There are also some useful functions for encoding and decoding of SNMP messages in the module snmp_pdus.