View Source reltool (reltool v1.0.1)

Main API of the Reltool application

This is an interface module for the Reltool application.

Reltool is a release management tool. It analyses a given Erlang/OTP installation and determines various dependencies between applications. The graphical frontend depicts the dependencies and enables interactive customization of a target system. The backend provides a batch interface for generation of customized target systems.

The tool uses an installed Erlang/OTP system as input. root_dir is the root directory of the analysed system and it defaults to the system executing Reltool. Applications may also be located outside root_dir. lib_dirs defines library directories where additional applications may reside and it defaults to the directories listed by the operating system environment variable ERL_LIBS. See the module code for more info.

An application directory AppDir under a library directory is recognized by the existence of an AppDir/ebin directory. If this does not exist, Reltool will not consider AppDir at all when looking for applications.

It is recommended that application directories are named as the application, possibly followed by a dash and the version number. For example myapp or myapp-1.1.

Finally single modules and entire applications may be read from Escripts.

Some configuration parameters control the behavior of Reltool on system (sys) level. Others provide control on application (app) level and yet others are on module (mod) level. Module level parameters override application level parameters and application level parameters override system level parameters. Escript escript level parameters override system level parameters.

The following top level options are supported:

  • config - This is the main option and it controls the configuration of Reltool. It can either be a sys tuple or a name of a file containing a sys tuple.

  • trap_exit - This option controls the error handling behavior of Reltool. By default the window processes traps exit, but this behavior can altered by setting trap_exit to false.

  • wx_debug - This option controls the debug level of wx. As its name indicates it is only useful for debugging. See wx:debug/1 for more info.

Besides the already mentioned source parameters root_dir and lib_dirs, the following system (sys) level options are supported:

  • erts - Erts specific configuration. See application level options below.

  • escript - Escript specific configuration. An escript has a mandatory file name and escript level options that are described below.

  • app - Application specific configuration. An application has a mandatory name and application level options that are described below.

  • mod_cond - This parameter controls the module inclusion policy. It defaults to all which means that if an application is included (either explicitly or implicitly) all modules in that application will be included. This implies that both modules that exist in the ebin directory of the application, as well as modules that are named in the app file will be included. If the parameter is set to ebin, both modules in the ebin directory and derived modules are included. If the parameter is set to app, both modules in the app file and derived modules are included. derived means that only modules that are used by other included modules are included. The mod_cond setting on system level is used as default for all applications.

  • incl_cond - This parameter controls the application and escript inclusion policy. It defaults to derived which means that the applications that do not have any explicit incl_cond setting, will only be included if any other (explicitly or implicitly included) application uses it. The value include implies that all applications and escripts that do not have any explicit incl_cond setting will be included. exclude implies that all applications and escripts that do not have any explicit incl_cond setting will be excluded.

  • boot_rel - A target system may have several releases but the one given as boot_rel will be used as default when the system is booting up.

  • rel - Release specific configuration. Each release maps to a rel, script and boot file. See the module systools for more info about the details. Each release has a name, a version and a set of applications with a few release specific parameters such as type and included applications.

  • relocatable - This parameter controls whether the erl executable in the target system should automatically determine where it is installed or if it should use a hardcoded path to the installation. In the latter case the target system must be installed with reltool:install/2 before it can be used. If the system is relocatable, the file tree containing the target system can be moved to another location without re-installation. The default is true.

  • profile - The creation of the specification for a target system is performed in two steps. In the first step a complete specification is generated. It will likely contain much more files than you are interested in in your customized target system. In the second step the specification will be filtered according to your filters. There you have the ability to specify filters per application as well as system wide filters. You can also select a profile for your system. Depending on the profile, different default filters will be used. There are three different profiles to choose from: development, embedded and standalone. development is default. The parameters that are affected by the profile are: incl_sys_filters, excl_sys_filters, incl_app_filters and excl_app_filters.

  • app_file - This parameter controls the default handling of the app files when a target system is generated. It defaults to keep which means that app files are copied to the target system and their contents are kept as they are. strip means that a new app file is generated from the contents of the original app file where the non included modules are removed from the file. all does also imply that a new app file is generated from the contents of the original app file, with the difference that all included modules are added to the file. If the application does not have any app file a file will be created for all but not for keep and strip.

  • debug_info - The debug_info parameter controls what debug information in the beam file should be kept or stripped. keep keeps all debug info, strip strips all debug info, and a list of chunkids keeps only those chunks.

  • excl_lib

    Warning

    This option is experimental.

    If the excl_lib option is set to otp_root then reltool will not copy anything from the Erlang/OTP installation ($OTPROOT) into the target structure. The goal is to create a "slim" release which can be used together with an existing Erlang/OTP installation. The target structure will therefore only contain a lib directory with the applications that were found outside of $OTPROOT (typically your own applications), and a releases directory with the generated .rel, .script and .boot files.

    When starting this release, three things must be specified:

    • Which releases directory to use - Tell the release handler to use the releases directory in our target structure instead of $OTPROOT/releases. This is done by setting the SASL environment variable releases_dir, either from the command line (-sasl releases_dir <target-dir>/releases) or in sys.config.

    • Which boot file to use - The default boot file is $OTPROOT/bin/start, but in this case we need to specify a boot file from our target structure, typically <target-dir>/releases/<vsn>/<RelName>. This is done with the -boot command line option to erl

    • The location of our applications - The generated .script (and .boot) file uses the environment variable $RELTOOL_EXT_LIB as prefix for the paths to all applications. The -boot_var option to erl can be used for specifying the value of this variable, typically -boot_var RELTOOL_EXT_LIB <target-dir>/lib.

    Example:

    erl -sasl releases_dir \"mytarget/releases\" -boot mytarget/releases/1.0/myrel\
     -boot_var RELTOOL_EXT_LIB mytarget/lib
  • incl_sys_filters - This parameter normally contains a list of regular expressions that controls which files in the system should be included. Each file in the target system must match at least one of the listed regular expressions in order to be included. Further the files may not match any filter in excl_sys_filters in order to be included. Which application files should be included is controlled with the parameters incl_app_filters and excl_app_filters. This parameter defaults to [".*"].

  • excl_sys_filters - This parameter normally contains a list of regular expressions that controls which files in the system should not be included in the target system. In order to be included, a file must match some filter in incl_sys_filters but not any filter in excl_sys_filters. This parameter defaults to [].

  • incl_app_filters - This parameter normally contains a list of regular expressions that controls which application specific files that should be included. Each file in the application must match at least one of the listed regular expressions in order to be included. Further the files may not match any filter in excl_app_filters in order to be included. This parameter defaults to [".*"].

  • excl_app_filters - This parameter normally contains a list of regular expressions that controls which application specific files should not be included in the target system. In order to be included, a file must match some filter in incl_app_filters but not any filter in excl_app_filters. This parameter defaults to [].

On application (escript) level, the following options are supported:

  • incl_cond - The value of this parameter overrides the parameter with the same name on system level.

On application (app) level, the following options are supported:

  • vsn - The version of the application. In an installed system there may exist several versions of an application. The vsn parameter controls which version of the application will be chosen.

    This parameter is mutual exclusive with lib_dir. If vsn and lib_dir are both omitted, the latest version will be chosen.

    Note that in order for reltool to sort application versions and thereby be able to select the latest, it is required that the version id for the application consists of integers and dots only, for example 1, 2.0 or 3.17.1.

  • lib_dir - The directory to read the application from. This parameter can be used to point out a specific location to fetch the application from. This is useful for instance if the parent directory for some reason is no good as a library directory on system level.

    This parameter is mutual exclusive with vsn. If vsn and lib_dir are both omitted, the latest version will be chosen.

    Note that in order for reltool to sort application versions and thereby be able to select the latest, it is required that the version id for the application consists of integers and dots only, for example 1, 2.0 or 3.17.1.

  • mod - Module specific configuration. A module has a mandatory name and module level options that are described below.

  • mod_cond - The value of this parameter overrides the parameter with the same name on system level.

  • incl_cond - The value of this parameter overrides the parameter with the same name on system level.

  • app_file - The value of this parameter overrides the parameter with the same name on system level.

  • debug_info - The value of this parameter overrides the parameter with the same name on system level.

  • incl_app_filters - The value of this parameter overrides the parameter with the same name on system level.

  • excl_app_filters - The value of this parameter overrides the parameter with the same name on system level.

On module (mod) level, the following options are supported:

  • incl_cond - This parameter controls whether the module is included or not. By default the mod_cond parameter on application and system level will be used to control whether the module is included or not. The value of incl_cond overrides the module inclusion policy. include implies that the module is included, while exclude implies that the module is not included. derived implies that the module is included if it is used by any other included module.

  • debug_info - The value of this parameter overrides the parameter with the same name on application level.

Summary

Functions

Create a target system.

Create the actual target system from a specification generated by reltool:get_target_spec/1.

Get contents of a release file. See rel for more details.

Get contents of a boot script file. See script for more details.

Return the process identifier of the server process.

Get status about the configuration

Return a specification of the target system. The actual target system can be created with reltool:eval_target_spec/3.

Install a created target system

Start a main window process with default options

Start a main window process with options

Start a main window process with options. The process is linked.

Start a server process with options. The server process identity can be given as an argument to several other functions in the API.

Stop a server or window process

Types

-type app() ::
          {vsn, app_vsn()} |
          {lib_dir, lib_dir()} |
          {mod, mod_name(), [mod()]} |
          {mod_cond, mod_cond()} |
          {incl_cond, incl_cond()} |
          {app_file, app_file()} |
          {debug_info, debug_info()} |
          {incl_app_filters, incl_app_filters()} |
          {excl_app_filters, excl_app_filters()}.
Link to this type

app_file()

View Source (not exported)
-type app_file() :: keep | strip | all.
Link to this type

app_name()

View Source (not exported)
-type app_name() :: atom().
Link to this type

app_type()

View Source (not exported)
-type app_type() :: permanent | transient | temporary | load | none.
Link to this type

app_vsn()

View Source (not exported)
-type app_vsn() :: string().
Link to this type

base_dir()

View Source (not exported)
-type base_dir() :: dir().
Link to this type

base_file()

View Source (not exported)
-type base_file() :: file().
Link to this type

boot_rel()

View Source (not exported)
-type boot_rel() :: rel_name().
Link to this type

config()

View Source (not exported)
-type config() :: {sys, [sys()]}.
Link to this type

debug_info()

View Source (not exported)
-type debug_info() :: keep | strip | [beam_lib:chunkid()].
-type dir() :: file:filename().
Link to this type

escript()

View Source (not exported)
-type escript() :: {incl_cond, incl_cond()}.
Link to this type

escript_file()

View Source (not exported)
-type escript_file() :: file().
Link to this type

excl_app_filters()

View Source (not exported)
-type excl_app_filters() :: regexps().
Link to this type

excl_lib()

View Source (not exported)
-type excl_lib() :: otp_root.
Link to this type

excl_sys_filters()

View Source (not exported)
-type excl_sys_filters() :: regexps().
-type file() :: file:filename().
Link to this type

incl_app()

View Source (not exported)
-type incl_app() :: app_name().
Link to this type

incl_app_filters()

View Source (not exported)
-type incl_app_filters() :: regexps().
Link to this type

incl_cond()

View Source (not exported)
-type incl_cond() :: include | exclude | derived.
Link to this type

incl_defaults()

View Source (not exported)
-type incl_defaults() :: boolean().
Link to this type

incl_derived()

View Source (not exported)
-type incl_derived() :: boolean().
Link to this type

incl_sys_filters()

View Source (not exported)
-type incl_sys_filters() :: regexps().
Link to this type

lib_dir()

View Source (not exported)
-type lib_dir() :: dir().
-type mod() :: {incl_cond, incl_cond()} | {debug_info, debug_info()}.
Link to this type

mod_cond()

View Source (not exported)
-type mod_cond() :: all | app | ebin | derived | none.
Link to this type

mod_name()

View Source (not exported)
-type mod_name() :: atom().
Link to this type

option()

View Source (not exported)
-type option() :: {wx_debug, term()} | {trap_exit, boolean()} | config() | {config, config() | file()}.
Link to this type

options()

View Source (not exported)
-type options() :: [option()].
Link to this type

profile()

View Source (not exported)
-type profile() :: development | embedded | standalone.
Link to this type

re_regexp()

View Source (not exported)
-type re_regexp() :: string().
Link to this type

reason()

View Source (not exported)
-type reason() :: string().
Link to this type

regexps()

View Source (not exported)
-type regexps() :: [re_regexp()] | {add, [re_regexp()]} | {del, [re_regexp()]}.
Link to this type

rel_app()

View Source (not exported)
-type rel_app() ::
          app_name() |
          {app_name(), app_type()} |
          {app_name(), [incl_app()]} |
          {app_name(), app_type(), [incl_app()]}.
Link to this type

rel_file()

View Source (not exported)
-type rel_file() :: term().
Link to this type

rel_name()

View Source (not exported)
-type rel_name() :: string().
Link to this type

rel_opt()

View Source (not exported)
-type rel_opt() :: {load_dot_erlang, boolean()}.
Link to this type

rel_vsn()

View Source (not exported)
-type rel_vsn() :: string().
Link to this type

relocatable()

View Source (not exported)
-type relocatable() :: boolean().
Link to this type

root_dir()

View Source (not exported)
-type root_dir() :: dir().
Link to this type

script_file()

View Source (not exported)
-type script_file() :: term().
Link to this type

server()

View Source (not exported)
-type server() :: server_pid() | options().
Link to this type

server_pid()

View Source (not exported)
-type server_pid() :: pid().
-type sys() ::
          {mod_cond, mod_cond()} |
          {incl_cond, incl_cond()} |
          {debug_info, debug_info()} |
          {app_file, app_file()} |
          {profile, profile()} |
          {excl_lib, excl_lib()} |
          {incl_sys_filters, incl_sys_filters()} |
          {excl_sys_filters, excl_sys_filters()} |
          {incl_app_filters, incl_app_filters()} |
          {excl_app_filters, excl_app_filters()} |
          {root_dir, root_dir()} |
          {lib_dirs, [lib_dir()]} |
          {boot_rel, boot_rel()} |
          {rel, rel_name(), rel_vsn(), [rel_app()]} |
          {rel, rel_name(), rel_vsn(), [rel_app()], [rel_opt()]} |
          {relocatable, relocatable()} |
          {erts, app()} |
          {escript, escript_file(), [escript()]} |
          {app, app_name(), [app()]}.
Link to this type

target_dir()

View Source (not exported)
-type target_dir() :: dir().
Link to this type

target_spec()

View Source (not exported)
-type target_spec() ::
          [target_spec()] |
          {create_dir, base_dir(), [target_spec()]} |
          {create_dir, base_dir(), top_dir(), [target_spec()]} |
          {copy_file, base_file()} |
          {copy_file, base_file(), top_file()} |
          {write_file, base_file(), binary()} |
          {strip_beam_file, base_file()}.
Link to this type

top_dir()

View Source (not exported)
-type top_dir() :: file().
Link to this type

top_file()

View Source (not exported)
-type top_file() :: file().
Link to this type

warning()

View Source (not exported)
-type warning() :: string().
Link to this type

window_pid()

View Source (not exported)
-type window_pid() :: pid().

Functions

Link to this function

create_target(PidOrOptions, TargetDir)

View Source
-spec create_target(server(), target_dir()) -> ok | {error, reason()}.

Create a target system.

Gives the same result as {ok,TargetSpec}=reltool:get_target_spec(Server) and reltool:eval_target_spec(TargetSpec,RootDir,TargetDir).

Link to this function

eval_target_spec(Spec, SourceDir, TargetDir)

View Source
-spec eval_target_spec(target_spec(), root_dir(), target_dir()) -> ok | {error, reason()}.

Create the actual target system from a specification generated by reltool:get_target_spec/1.

The creation of the specification for a target system is performed in two steps. In the first step a complete specification will be generated. It will likely contain much more files than you are interested in your target system. In the second step the specification will be filtered according to your filters. There you have the ability to specify filters per application as well as system wide filters. You can also select a profile for your system. Depending on the profile, different default filters will be used.

The top directories bin, releases and lib are treated differently from other files. All other files are by default copied to the target system. The releases directory contains generated rel, script, and boot files. The lib directory contains the applications. Which applications are included and if they should be customized (stripped from debug info etc.) is specified with various configuration parameters. The files in the bin directory are copied from the erts-vsn/bin directory, but only those files that were originally included in the bin directory of the source system.

If the configuration parameter relocatable was set to true there is no need to install the target system with reltool:install/2 before it can be started. In that case the file tree containing the target system can be moved without re-installation.

In most cases, the RootDir parameter should be set to the same as the root_dir configuration parameter used in the call to reltool:get_target_spec/1 (or code:root_dir/0 if the configuration parameter is not set). In some cases it might be useful to evaluate the same target specification towards different root directories. This should, however, be used with great care as it requires equivalent file structures under all roots.

-spec get_config(server()) -> {ok, config()} | {error, reason()}.

Equivalent to get_config(Server, false, false).

Link to this function

get_config(PidOrOptions, InclDef, InclDeriv)

View Source
-spec get_config(server(), incl_defaults(), incl_derived()) -> {ok, config()} | {error, reason()}.

Get reltool configuration.

Normally, only the explicit configuration parameters with values that differ from their defaults are interesting. But the builtin default values can be returned by setting InclDefaults to true. The derived configuration can be returned by setting InclDerived to true.

Link to this function

get_rel(PidOrOptions, RelName)

View Source
-spec get_rel(server(), rel_name()) -> {ok, rel_file()} | {error, reason()}.

Get contents of a release file. See rel for more details.

Link to this function

get_script(PidOrOptions, RelName)

View Source
-spec get_script(server(), rel_name()) -> {ok, script_file()} | {error, reason()}.

Get contents of a boot script file. See script for more details.

-spec get_server(window_pid()) -> {ok, server_pid()} | {error, reason()}.

Return the process identifier of the server process.

Link to this function

get_status(PidOrOptions)

View Source (since OTP R14B)
-spec get_status(server()) -> {ok, [warning()]} | {error, reason()}.

Get status about the configuration

Link to this function

get_target_spec(PidOrOptions)

View Source
-spec get_target_spec(server()) -> {ok, target_spec()} | {error, reason()}.

Return a specification of the target system. The actual target system can be created with reltool:eval_target_spec/3.

Link to this function

install(RelName, TargetDir)

View Source
-spec install(rel_name(), dir()) -> ok | {error, reason()}.

Install a created target system

-spec start() -> {ok, window_pid()} | {error, reason()}.

Start a main window process with default options

-spec start(options()) -> {ok, window_pid()} | {error, reason()}.

Start a main window process with options

-spec start_link(options()) -> {ok, window_pid()} | {error, reason()}.

Start a main window process with options. The process is linked.

-spec start_server(options()) -> {ok, server_pid()} | {error, reason()}.

Start a server process with options. The server process identity can be given as an argument to several other functions in the API.

-spec stop(server_pid() | window_pid()) -> ok | {error, reason()}.

Stop a server or window process