View Source instrument (runtime_tools v2.1.1)

Analysis and Utility Functions for Instrumentation

The module instrument contains support for studying the resource usage in an Erlang runtime system. Currently, only the allocation of memory can be studied.

Note

Since this module inspects internal details of the runtime system it may differ greatly from one version to another. We make no compatibility guarantees in this module.

See Also

erts_alloc(3), erl(1)

Summary

Types

A summary of allocated block sizes (including their headers) grouped by their Origin and Type.

A histogram of block sizes where each interval's upper bound is twice as high as the one before it.

AllocatorType is the type of the allocator that employs this carrier.

Functions

Returns a summary of all tagged allocations in the system, optionally filtered by allocator type and scheduler id.

Equivalent to carriers(#{}).

Returns a summary of all carriers in the system, optionally filtered by allocator type and scheduler id.

Types

Link to this type

allocation_origin()

View Source (not exported)
-type allocation_origin() :: atom() | mfa() | pid() | port().
Link to this type

allocation_summary()

View Source (not exported)
-type allocation_summary() ::
          {HistogramStart :: non_neg_integer(),
           UnscannedSize :: non_neg_integer(),
           Allocations :: #{Origin :: allocation_origin() => #{Type :: atom() => block_histogram()}}}.

A summary of allocated block sizes (including their headers) grouped by their Origin and Type.

Origin is generally which NIF or driver that allocated the blocks, or 'system' if it could not be determined.

Type is the allocation category that the blocks belong to, e.g. db_term, message or binary. The categories correspond to those in erl_alloc.types.

If one or more carriers could not be scanned in full without harming the responsiveness of the system, UnscannedSize is the number of bytes that had to be skipped.

Link to this type

block_histogram()

View Source (not exported)
-type block_histogram() :: tuple().

A histogram of block sizes where each interval's upper bound is twice as high as the one before it.

The upper bound of the first interval is provided by the function that returned the histogram, and the last interval has no upper bound.

For example, the histogram below has 40 (message) blocks between 128-256 bytes in size, 78 blocks between 256-512 bytes,2 blocks between 512-1024 bytes, and 2 blocks between 1-2KB.

> instrument:allocations(#{ histogram_start => 128, histogram_width => 15 }).
{ok, {128, 0, #{ message => {0,40,78,2,2,0,0,0,0,0,0,0,0,0,0}, ... } }}
Link to this type

carrier_info_list()

View Source (not exported)
-type carrier_info_list() ::
          {HistogramStart :: non_neg_integer(),
           Carriers ::
               [{AllocatorType :: atom(),
                 InPool :: boolean(),
                 TotalSize :: non_neg_integer(),
                 UnscannedSize :: non_neg_integer(),
                 Allocations ::
                     [{Type :: atom(), Count :: non_neg_integer(), Size :: non_neg_integer()}],
                 FreeBlocks :: block_histogram()}]}.

AllocatorType is the type of the allocator that employs this carrier.

InPool is whether the carrier is in the migration pool.

TotalSize is the total size of the carrier, including its header.

Allocations is a summary of the allocated blocks in the carrier. Note that carriers may contain multiple different block types when carrier pools are shared between different allocator types (see the erts_alloc documentation for more details).

FreeBlocks is a histogram of the free block sizes in the carrier.

If the carrier could not be scanned in full without harming the responsiveness of the system, UnscannedSize is the number of bytes that had to be skipped.

Functions

Link to this function

allocations()

View Source (since OTP 21.0)
-spec allocations() -> {ok, Result} | {error, Reason}
                     when Result :: allocation_summary(), Reason :: not_enabled.

Equivalent to allocations(#{}).

Link to this function

allocations(Options)

View Source (since OTP 21.0)
-spec allocations(Options) -> {ok, Result} | {error, Reason}
                     when
                         Result :: allocation_summary(),
                         Reason :: not_enabled,
                         Options ::
                             #{scheduler_ids => [non_neg_integer()],
                               allocator_types => [atom()],
                               histogram_start => pos_integer(),
                               histogram_width => pos_integer(),
                               flags => [per_process | per_port | per_mfa]}.

Returns a summary of all tagged allocations in the system, optionally filtered by allocator type and scheduler id.

Only binaries and allocations made by NIFs and drivers are tagged by default, but this can be configured an a per-allocator basis with the +M<S>atags emulator option.

If the specified allocator types are not enabled, the call will fail with {error, not_enabled}.

The following options can be used:

  • allocator_types - The allocator types that will be searched.

    Specifying a specific allocator type may lead to strange results when carrier migration between different allocator types has been enabled: you may see unexpected types (e.g. process heaps when searching binary_alloc), or fewer blocks than expected if the carriers the blocks are on have been migrated out to an allocator of a different type.

    Defaults to all alloc_util allocators.

  • scheduler_ids - The scheduler ids whose allocator instances will be searched. A scheduler id of 0 will refer to the global instance that is not tied to any particular scheduler. Defaults to all schedulers and the global instance.

  • histogram_start - The upper bound of the first interval in the allocated block size histograms. Defaults to 128.

  • histogram_width - The number of intervals in the allocated block size histograms. Defaults to 18.

  • flags - Controls how to group the output, for example showing allocations on a per-process basis (when possible) rather than only a NIF/driver-basis. Defaults to [].

Example:

> instrument:allocations(#{ histogram_start => 128, histogram_width => 15 }).
{ok,{128,0,
     #{udp_inet =>
           #{driver_event_state => {0,0,0,0,0,0,0,0,0,1,0,0,0,0,0}},
       system =>
           #{heap => {0,0,0,0,20,4,2,2,2,3,0,1,0,0,1},
             db_term => {271,3,1,52,80,1,0,0,0,0,0,0,0,0,0},
             code => {0,0,0,5,3,6,11,22,19,20,10,2,1,0,0},
             binary => {18,0,0,0,7,0,0,1,0,0,0,0,0,0,0},
             message => {0,40,78,2,2,0,0,0,0,0,0,0,0,0,0},
             ... }
       spawn_forker =>
           #{driver_select_data_state =>
                 {1,0,0,0,0,0,0,0,0,0,0,0,0,0,0}},
       ram_file_drv => #{drv_binary => {0,0,0,0,0,0,1,0,0,0,0,0,0,0,0}},
       prim_file =>
           #{process_specific_data => {2,0,0,0,0,0,0,0,0,0,0,0,0,0,0},
             nif_trap_export_entry => {0,4,0,0,0,0,0,0,0,0,0,0,0,0,0},
             monitor_extended => {0,1,0,0,0,0,0,0,0,0,0,0,0,0,0},
             drv_binary => {0,0,0,0,0,0,1,0,3,5,0,0,0,1,0},
             binary => {0,4,0,0,0,0,0,0,0,0,0,0,0,0,0}},
       prim_buffer =>
           #{nif_internal => {0,4,0,0,0,0,0,0,0,0,0,0,0,0,0},
             binary => {0,4,0,0,0,0,0,0,0,0,0,0,0,0,0}}}}}
Link to this function

carriers()

View Source (since OTP 21.0)
-spec carriers() -> {ok, Result} | {error, Reason}
                  when Result :: carrier_info_list(), Reason :: not_enabled.

Equivalent to carriers(#{}).

Link to this function

carriers(Options)

View Source (since OTP 21.0)
-spec carriers(Options) -> {ok, Result} | {error, Reason}
                  when
                      Result :: carrier_info_list(),
                      Reason :: not_enabled,
                      Options ::
                          #{scheduler_ids => [non_neg_integer()],
                            allocator_types => [atom()],
                            histogram_start => pos_integer(),
                            histogram_width => pos_integer()}.

Returns a summary of all carriers in the system, optionally filtered by allocator type and scheduler id.

If the specified allocator types are not enabled, the call will fail with {error, not_enabled}.

The following options can be used:

  • allocator_types - The allocator types that will be searched. Defaults to all alloc_util allocators.

  • scheduler_ids - The scheduler ids whose allocator instances will be searched. A scheduler id of 0 will refer to the global instance that is not tied to any particular scheduler. Defaults to all schedulers and the global instance.

  • histogram_start - The upper bound of the first interval in the free block size histograms. Defaults to 512.

  • histogram_width - The number of intervals in the free block size histograms. Defaults to 14.

Example:

> instrument:carriers(#{ histogram_start => 512, histogram_width => 8 }).
{ok,{512,
     [{driver_alloc,false,262144,0,
                    [{driver_alloc,1,32784}],
                    {0,0,0,0,0,0,0,1}},
      {binary_alloc,false,32768,0,
                    [{binary_alloc,15,4304}],
                    {3,0,0,0,1,0,0,0}},
      {...}|...]}}