View Source cover (tools v4.1)

A Coverage Analysis Tool for Erlang

The module cover provides a set of functions for coverage analysis of Erlang programs, counting how many times each executable line of code is executed when a program is run. Executable lines are lines in the body of a clause in a function, case, receive, or try. Lines in clause heads, blank lines, and lines containing only comments are not executable.

Coverage analysis can be used to verify that test cases covers all relevant line in the code being test. It can also be helpful when looking for bottlenecks in the code.

Before any analysis can take place, the involved modules has to be cover-compiled. This means that some extra information is added to the module before it is compiled into a binary which then is loaded. The source file of the module is not affected and no .beam file is created. If the runtime system supports coverage natively, Cover will automatically use that functionality to lower the execution overhead for cover-compiled code.

Change

Native coverage support was added in Erlang/OTP 27.

Each time a function in a cover-compiled module is called, information about the call is added to an internal database of Cover. The coverage analysis is performed by examining the contents of the Cover database. The output Answer is determined by two parameters: Level and Analysis.

  • Level = module

    Answer = {Module,Value}, where Module is the module name.

  • Level = function

    Answer = [{Function,Value}], one tuple for each function in the module. A function is specified by its module name M, function name F and arity A as a tuple {M,F,A}.

  • Level = clause

    Answer = [{Clause,Value}], one tuple for each clause in the module. A clause is specified by its module name M, function name F, arity A and position in the function definition C as a tuple {M,F,A,C}.

  • Level = line

    Answer = [{Line,Value}], one tuple for each executable line in the module. A line is specified by its module name M and line number in the source file N as a tuple {M,N}.

  • Analysis = coverage

    Value = {Cov,NotCov} where Cov is the number of executable lines in the module, function, clause or line that have been executed at least once and NotCov is the number of executable lines that have not been executed.

  • Analysis = calls

    Value = Calls which is the number of times the module, function, or clause has been called. In the case of line level analysis, Calls is the number of times the line has been executed.

Distribution

Cover can be used in a distributed Erlang system. One of the nodes in the system has to be selected as the main node, and all Cover commands must be executed from that node. The error reason not_main_node is returned if an interface function is called on one of the remote nodes.

Use cover:start/1 and cover:stop/1 to add or remove nodes. The same cover-compiled code will be loaded on each node, and analysis will collect and sum up coverage data results from all nodes.

To only collect data from remote nodes without stopping cover on those nodes, use cover:flush/1

If the connection to a remote node goes down, the main node will mark it as lost. If the node comes back it will be added again. If the remote node was alive during the disconnected period, cover data from before and during this period will be included in the analysis.

Summary

Functions

Analyzes one or more modules as specified by Arg.

Analyzes one or more modules as specified by Arg1 and Arg2.

Perform analysis of one or more cover-compiled modules, as specified by Analysis and Level, by examining the contents of the internal database.

If Arg is a list of analyse_option() options, this call is equivalent to analyse_to_file('_', Arg).

Outputs copies of the source code for the given modules annotated with execution counts for each executable line.

This function works the same way as analyse_to_file/2 except that it is asynchronous instead of synchronous.

Cover-compiles one or more modules based .beam files containing abstract code (option debug_info).

Cover-compiles all .beam files in directory Dir in the same way as compile_beam/1.

Compiles all modules (.erl files) in a directory Dir for Cover analysis the same way as compile_module/1,2 and returns a list of Result.

Cover-compiles one or more modules.

Exports the current coverage data for Module to the file ExportFile.

Fetches data from the Cover database on the remote nodes and stores it on the main node.

Imports coverage data from the file ExportFile created with export/1,2.

Returns a list of all imported files.

Returns a list of all modules for which there are imported data.

Returns {file, File} if the module Module is cover-compiled, or false otherwise.

Only support running Cover on the local node.

Returns a list with all modules that are currently cover-compiled.

Resets all coverage data for all cover-compiled modules in the Cover database on all nodes.

Resets all coverage data for the cover-compiled module Module in the Cover database on all nodes.

Starts the Cover server which owns the Cover internal database. This function is called automatically by the other functions in the module.

Starts a Cover server on the each of given nodes, and loads all cover compiled modules.

Stops the Cover server and unloads all cover-compiled code.

Stops the Cover server and unloads all cover-compiled code on the given nodes.

Returns a list with all nodes that are part of the coverage analysis.

Types

Link to this type

analyse_answer()

View Source (not exported)
-type analyse_answer() :: {ok, OutFile :: file:filename()} | {error, analyse_rsn()}.
Link to this type

analyse_fail()

View Source (not exported)
-type analyse_fail() :: [{not_cover_compiled, module()}].
Link to this type

analyse_file_fail()

View Source (not exported)
-type analyse_file_fail() :: [analyse_rsn()].
Link to this type

analyse_file_ok()

View Source (not exported)
-type analyse_file_ok() :: [OutFile :: file:filename()].
Link to this type

analyse_item()

View Source (not exported)
-type analyse_item() ::
          (Line :: {M :: module(), N :: non_neg_integer()}) |
          (Clause :: {M :: module(), F :: atom(), A :: arity(), C :: non_neg_integer()}) |
          (Function :: {M :: module(), F :: atom(), A :: arity()}).
Link to this type

analyse_ok()

View Source (not exported)
-type analyse_ok() ::
          [{Module :: module(), Value :: analyse_value()}] |
          [{Item :: analyse_item(), Value :: analyse_value()}].
Link to this type

analyse_option()

View Source (not exported)
-type analyse_option() ::
          html | {outfile, OutFile :: file:filename()} | {outdir, OutDir :: file:filename()}.
Link to this type

analyse_rsn()

View Source (not exported)
-type analyse_rsn() ::
          {not_cover_compiled, Module :: module()} |
          {file, File :: file:filename(), Reason :: term()} |
          {no_source_code_found, Module :: module()}.
Link to this type

analyse_value()

View Source (not exported)
-type analyse_value() ::
          {Cov :: non_neg_integer(), NotCov :: non_neg_integer()} | (Calls :: non_neg_integer()).
Link to this type

analysis()

View Source (not exported)
-type analysis() :: coverage | calls.
Link to this type

beam_mod_file()

View Source (not exported)
-type beam_mod_file() :: (Module :: module()) | (BeamFile :: file:filename()).
Link to this type

beam_mod_files()

View Source (not exported)
-type beam_mod_files() :: beam_mod_file() | [beam_mod_file()].
Link to this type

compile_beam_result()

View Source (not exported)
-type compile_beam_result() ::
          {ok, module()} | {error, BeamFile :: file:filename()} | {error, Reason :: compile_beam_rsn()}.
Link to this type

compile_beam_rsn()

View Source (not exported)
-type compile_beam_rsn() ::
          non_existing |
          {no_abstract_code, BeamFile :: file:filename()} |
          {encrypted_abstract_code, BeamFile :: file:filename()} |
          {already_cover_compiled, no_beam_found, module()} |
          {{missing_backend, module()}, BeamFile :: file:filename()} |
          {no_file_attribute, BeamFile :: file:filename()} |
          not_main_node.
Link to this type

compile_result()

View Source (not exported)
-type compile_result() :: {ok, Module :: module()} | {error, file:filename()} | {error, not_main_node}.
Link to this type

export_reason()

View Source (not exported)
-type export_reason() ::
          {not_cover_compiled, Module :: module()} |
          {cant_open_file, ExportFile :: file:filename(), FileReason :: term()} |
          not_main_node.
Link to this type

file_error()

View Source (not exported)
-type file_error() :: eacces | enoent.
Link to this type

level()

View Source (not exported)
-type level() :: line | clause | function | module.
Link to this type

mod_file()

View Source (not exported)
-type mod_file() :: (Module :: module()) | (File :: file:filename()).
Link to this type

mod_files()

View Source (not exported)
-type mod_files() :: mod_file() | [mod_file()].
Link to this type

modules()

View Source (not exported)
-type modules() :: module() | [module()].
Link to this type

one_result()

View Source (not exported)
-type one_result() ::
          {ok, {Module :: module(), Value :: analyse_value()}} |
          {ok, [{Item :: analyse_item(), Value :: analyse_value()}]} |
          {error, {not_cover_compiled, module()}}.
Link to this type

option()

View Source (not exported)
-type option() ::
          {i, Dir :: file:filename()} |
          {d, Macro :: atom()} |
          {d, Macro :: atom(), Value :: term()} |
          export_all.

Functions

Link to this function

analyse()

View Source (since OTP 18.0)
-spec analyse() -> {result, analyse_ok(), analyse_fail()} | {error, not_main_node}.

Equivalent to analyse('_', coverage, function).

-spec analyse(Analysis) -> {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when Analysis :: analysis();
             (Level) -> {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when Level :: level();
             (Modules) -> OneResult | {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when Modules :: modules(), OneResult :: one_result().

Analyzes one or more modules as specified by Arg.

If Arg is one of the values in analysis(), this call is equivalent to analyse('_', Arg, function).

If Arg is one of the values in level(), this call is equivalent to analyse('_', coverage, Arg).

Otherwise Arg is assumed to be a module name, and this call is equivalent to analyse(Arg, coverage, function).

Note

To analyze a module whose name overlaps with one the values in analysis() or level(), the module name has to be in a list. For example, to analyze a module named calls:

cover:analyse([calls]).
-spec analyse(Analysis, Level) -> {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when Analysis :: analysis(), Level :: level();
             (Modules, Analysis) ->
                 OneResult | {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when Analysis :: analysis(), Modules :: modules(), OneResult :: one_result();
             (Modules, Level) ->
                 OneResult | {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when Level :: level(), Modules :: modules(), OneResult :: one_result().

Analyzes one or more modules as specified by Arg1 and Arg2.

If Arg1 is one of the values in analysis() and Arg2 is one of the values in level(), this call is equivalent to analyse('_', Arg1, Arg2).

If Arg2 is one of the values in analysis(), Arg1 is assumed to be a module and this call is equivalent to analyse(Arg1, Arg2, function).

If Arg2 is one of the values in level(), Arg1 is assumed to be a module and this call is equivalent to analyse(Arg1, coverage, Arg2).

Note

To analyze a module whose name overlaps with one of the values in analysis(), the module name needs to be in a list. For example, to analyze a module named calls:

cover:analyse([calls], function).
Link to this function

analyse(Modules, Analysis, Level)

View Source
-spec analyse(Modules, Analysis, Level) ->
                 OneResult | {result, analyse_ok(), analyse_fail()} | {error, not_main_node}
                 when
                     Analysis :: analysis(),
                     Level :: level(),
                     Modules :: modules(),
                     OneResult :: one_result().

Perform analysis of one or more cover-compiled modules, as specified by Analysis and Level, by examining the contents of the internal database.

If Modules is an atom (a single module), the return is OneResult, otherwise the return is {result, Ok, Fail}.

If Modules is atom '_', all modules that have data in the cover data table are analysed. Note that this includes both cover-compiled modules and imported modules.

If a given module is not cover-compiled, this is indicated by the error reason {not_cover_compiled, Module}.

Link to this function

analyse_to_file()

View Source (since OTP 18.0)
-spec analyse_to_file() -> {result, analyse_file_ok(), analyse_file_fail()} | {error, not_main_node}.

Equivalent to analyse_to_file('_', []).

-spec analyse_to_file(Modules) ->
                         Answer |
                         {result, analyse_file_ok(), analyse_file_fail()} |
                         {error, not_main_node}
                         when Modules :: modules(), Answer :: analyse_answer();
                     (Options) ->
                         {result, analyse_file_ok(), analyse_file_fail()} | {error, not_main_node}
                         when Options :: [analyse_option()].

If Arg is a list of analyse_option() options, this call is equivalent to analyse_to_file('_', Arg).

Otherwise Arg is assumed to be a module, and this call is equivalent to analyse_to_file(Arg, []).

Note

To analyze a module of the name html (which overlaps with an option in analyse_option()), it is necessary to use cover:analyse_to_file/2:

cover:analyse_to_file([html], []).
Link to this function

analyse_to_file(Modules, Options)

View Source
-spec analyse_to_file(Modules, Options) ->
                         Answer |
                         {result, analyse_file_ok(), analyse_file_fail()} |
                         {error, not_main_node}
                         when
                             Modules :: modules(),
                             Options :: [analyse_option()],
                             Answer :: analyse_answer().

Outputs copies of the source code for the given modules annotated with execution counts for each executable line.

The output file OutFile defaults to Module.COVER.out, and to Module.COVER.html if option html is used.

If Modules is an atom (one module), the return will be Answer, otherwise the return will be a list, {result, Ok, Fail}.

If Modules is '_', all modules that have data in the Cover data table are analysed. Note that this includes both cover-compiled modules and imported modules.

If a module is not cover-compiled, this is indicated by the error reason {not_cover_compiled, Module}.

If the source file and/or the output file cannot be opened using file:open/2, the function returns {error, {file, File, Reason}}, where File is the file name and Reason is the error reason.

If a module was cover compiled from the .beam file, that is, using compile_beam/1 or compile_beam_directory/0,1 , it is assumed that the source code can be found in one of the following locations:

  • the same directory as the .beam file
  • ../src relative to the directory with .beam file
  • the source path in Module:module_info(compile), in which case two paths are examined:
    • first the one constructed by joining ../src and the tail of the compiled path below a trailing src component
    • the compiled path itself

If no source code is found, this is indicated by the error reason {no_source_code_found, Module}.

Link to this function

async_analyse_to_file(Module)

View Source (since OTP R14B02)
-spec async_analyse_to_file(Module) -> pid() when Module :: module().

Equivalent to async_analyse_to_file/3.

Link to this function

async_analyse_to_file(Module, OutFileOrOpts)

View Source (since OTP R14B02)
-spec async_analyse_to_file(Module, OutFile) -> pid()
                               when Module :: module(), OutFile :: file:filename();
                           (Module, Options) -> pid()
                               when Module :: module(), Options :: [Option], Option :: html.

Equivalent to async_analyse_to_file/3.

Link to this function

async_analyse_to_file(Module, OutFile, Options)

View Source (since OTP R14B02)
-spec async_analyse_to_file(Module, OutFile, Options) -> pid()
                               when
                                   Module :: module(),
                                   OutFile :: file:filename(),
                                   Options :: [Option],
                                   Option :: html.

This function works the same way as analyse_to_file/2 except that it is asynchronous instead of synchronous.

The spawned process will link with the caller when created. If an error of type analyse_rsn() occurs while doing the cover analysis the process will crash with the same error reason as analyse_to_file would return.

-spec compile(ModFiles) -> Result | [Result] when ModFiles :: mod_files(), Result :: compile_result().

Equivalent to compile_module(ModFiles, []).

Link to this function

compile(ModFiles, Options)

View Source
-spec compile(ModFiles, Options) -> Result | [Result]
                 when ModFiles :: mod_files(), Options :: [option()], Result :: compile_result().

Equivalent to compile_module(ModFile, Options).

-spec compile_beam(ModFiles) -> Result | [Result]
                      when ModFiles :: beam_mod_files(), Result :: compile_beam_result().

Cover-compiles one or more modules based .beam files containing abstract code (option debug_info).

Cover-compiling from .beam files is faster than compiling from source and less hassle, because there is no need to supply options for include paths or macros. However, the existing .beam files must have been compiled with option debug_info so that they contain abstract code.

If abstract code is missing, the error reason {no_abstract_code, BeamFile} is returned. If the abstract code is encrypted, and no key is available for decrypting it, the error reason {encrypted_abstract_code, BeamFile} is returned.

If only the module name (that is, not the full name of the .beam file) is given to this function, the .beam file is found by calling code:which(Module). If no .beam file is found, the error reason non_existing is returned. If the module is already cover compiled with compile_beam/1, the .beam file will be picked from the same location as the first time it was compiled. If the module is already cover-compiled with compile_module/2, there is no way to find the correct .beam file, so the error reason {already_cover_compiled, no_beam_found, Module} is returned.

{error, BeamFile} is returned if the compiled code cannot be loaded on the node.

If a list of ModFiles is given as input, a list of Result will be returned. The order of the returned list is undefined.

Link to this function

compile_beam_directory()

View Source
-spec compile_beam_directory() -> [Result] | {error, Reason}
                                when Reason :: file_error(), Result :: compile_beam_result().

Equivalent to compile_beam_directory(".").

Link to this function

compile_beam_directory(Dir)

View Source
-spec compile_beam_directory(Dir) -> [Result] | {error, Reason}
                                when
                                    Dir :: file:filename(),
                                    Reason :: file_error(),
                                    Result :: compile_beam_result().

Cover-compiles all .beam files in directory Dir in the same way as compile_beam/1.

This function returns a list of compile_beam_result() if successful. Otherwise, it returns {error, eacces} if the directory is not readable, and {error, enoent} if the directory does not exist.

-spec compile_directory() -> [Result] | {error, Reason}
                           when Reason :: file_error(), Result :: compile_result().

Equivalent to compile_directory(".", []).

-spec compile_directory(Dir) -> [Result] | {error, Reason}
                           when
                               Dir :: file:filename(),
                               Reason :: file_error(),
                               Result :: compile_result().

Equivalent to compile_directory(Dir, []).

Link to this function

compile_directory(Dir, Options)

View Source
-spec compile_directory(Dir, Options) -> [Result] | {error, Reason}
                           when
                               Dir :: file:filename(),
                               Options :: [option()],
                               Reason :: file_error(),
                               Result :: compile_result().

Compiles all modules (.erl files) in a directory Dir for Cover analysis the same way as compile_module/1,2 and returns a list of Result.

This function returns {error, eacces} if the directory is not readable or {error, enoent} if the directory does not exist.

Link to this function

compile_module(ModFiles)

View Source
-spec compile_module(ModFiles) -> Result | [Result]
                        when ModFiles :: mod_files(), Result :: compile_result().

Equivalent to compile_module(ModFile, []).

Link to this function

compile_module(ModFiles, Options)

View Source
-spec compile_module(ModFiles, Options) -> Result | [Result]
                        when ModFiles :: mod_files(), Options :: [option()], Result :: compile_result().

Cover-compiles one or more modules.

The module is given by its module name Module or by its file name File.

The .erl extension can be omitted. If the module is not located in the current directory, the full path to it must be specified.

Options is a list of compiler options. Only options defining include file directories and macros are passed to compile:file/2; everything else is ignored.

If the module is successfully cover-compiled, the function returns {ok, Module}. Otherwise the function returns {error, File}. Errors and warnings are printed as they occur.

If a list of ModFiles is given as input, a list of Result will be returned. The order of the returned results in the list is undefined.

Note that the internal database is initialized during the compilation, which means that any previously collected coverage data for the module is lost.

-spec export(File) -> ok | {error, Reason} when File :: file:filename(), Reason :: export_reason().

Equivalent to export(File, '_').

-spec export(File, Module) -> ok | {error, Reason}
                when File :: file:filename(), Module :: module(), Reason :: export_reason().

Exports the current coverage data for Module to the file ExportFile.

It is recommended to name the ExportFile with the extension .coverdata.

If Module is '_', data for all cover-compiled or earlier imported modules is exported.

This function is useful if coverage data from different systems is to be merged.

See also import/1.

Link to this function

flush(Nodes)

View Source (since OTP R16B)
-spec flush(Nodes) -> ok | {error, not_main_node} when Nodes :: node() | [node()].

Fetches data from the Cover database on the remote nodes and stores it on the main node.

-spec import(ExportFile) -> ok | {error, Reason}
                when
                    ExportFile :: file:filename(),
                    Reason :: {cant_open_file, ExportFile, FileReason :: term()} | not_main_node.

Imports coverage data from the file ExportFile created with export/1,2.

Any analysis performed after this call will include the imported data.

Note that when compiling a module all existing coverage data is removed, including imported data. If a module is already compiled when data is imported, the imported data is added to the existing coverage data.

Coverage data from several export files can be imported into one system. The coverage data is then added up when analysing.

Coverage data for a module cannot be imported from the same file twice unless the module is first reset or compiled. The check is based on the filename, so you can easily fool the system by renaming your export file.

-spec imported() -> [file:filename()] | {error, not_main_node}.

Returns a list of all imported files.

-spec imported_modules() -> [module()] | {error, not_main_node}.

Returns a list of all modules for which there are imported data.

-spec is_compiled(Module) -> {file, File :: file:filename()} | false | {error, not_main_node}
                     when Module :: module().

Returns {file, File} if the module Module is cover-compiled, or false otherwise.

File is the .erl file used by compile_module/1,2 or the .beam file used by compile_beam/1.

Link to this function

local_only()

View Source (since OTP 22.0)
-spec local_only() -> ok | {error, too_late}.

Only support running Cover on the local node.

This function has to be called before any modules have been compiled or any nodes added. When running in this mode, modules will be cover-compiled in a more efficient way, but the resulting code will only work on the same node they were compiled on.

-spec modules() -> [module()] | {error, not_main_node}.

Returns a list with all modules that are currently cover-compiled.

-spec reset() -> ok | {error, not_main_node}.

Resets all coverage data for all cover-compiled modules in the Cover database on all nodes.

-spec reset(Module) -> ok | {error, not_main_node} | {error, {not_cover_compiled, Module}}
               when Module :: module().

Resets all coverage data for the cover-compiled module Module in the Cover database on all nodes.

If Module is not cover-compiled, the function returns {error, {not_cover_compiled, Module}}.

-spec start() -> {ok, pid()} | {error, Reason} when Reason :: {already_started, pid()} | term().

Starts the Cover server which owns the Cover internal database. This function is called automatically by the other functions in the module.

-spec start(Nodes) -> {ok, StartedNodes} | {error, not_main_node} | {error, local_only}
               when Nodes :: node() | [node()], StartedNodes :: [node()].

Starts a Cover server on the each of given nodes, and loads all cover compiled modules.

This call will fail if cover:local_only/0 has been called.

-spec stop() -> ok | {error, not_main_node}.

Stops the Cover server and unloads all cover-compiled code.

-spec stop(Nodes) -> ok | {error, not_main_node} when Nodes :: node() | [node()].

Stops the Cover server and unloads all cover-compiled code on the given nodes.

Data stored in the Cover database on the remote nodes is fetched and stored on the main node.

-spec which_nodes() -> [node()].

Returns a list with all nodes that are part of the coverage analysis.

Note that the current node is not included, because it is always part of the analysis.